Benchmade.com    The Benchmade Community    Forums  Hop To Forum Categories  Discussion  Hop To Forums  Knives & Rescue Tools    755 Clip Adjustment
Page 1 2 

Moderators: Benchmade, Benchmade Sales Team

Closed Topic Closed
Go
New
Find
Notify
Tools
755 Clip Adjustment
 Login/Join
 
910stryker
"mmmm"
Picture of 910stryker
Posted Hide Post
i believe to be properly worked Ti must be heated. the metal has "memory" and as you found out, its brittle when working it cold.
i had similar experiences with my own but after polishing the underside of the clip to a shine i was more than happy with the way it handled.


------------------------------
 
Posts: 982 | Location: FL | Registered: October 01, 2008Report This Post
canadianknifenut
"CKN"
Picture of canadianknifenut
Posted Hide Post
quote:
Originally posted by 910stryker:
i had similar experiences with my own but after polishing the underside of the clip to a shine i was more than happy with the way it handled.

Should have listened to you in the first place Big Grin...Oh well, its only a clip so not biggie. Rob you are right, I did learn from this Big Grin Never knew ti was so brittle.


Boomerangs 'n Butterflies: An Osborne Alliance | Member #960
 
Posts: 1965 | Location: B.C., Canada | Registered: April 18, 2006Report This Post
Mark G.

Stings like a Butterfly


Picture of Mark G.
Posted Hide Post
I have had no issues getting mine clipped to the pocket as it is delivered from the factory. I also tend to use my finger to pull the clip out a bit when I stick it in the pocket. I do this will all my knives and it really helps to save wear on the pocket.


-----------------
Current President Brotherhood of the 420 & Viceroy of the Knights of the Gravitator. SPTA Founding Member. Allen Elishewitz Preservation Society Founding Member #5. Lum Lunatics First Mate. The Contego Amigos Numero Uno
 
Posts: 6305 | Location: Ohio | Registered: April 05, 2004Report This Post
dj
"Steel Snob M-4"
Picture of dj
Posted Hide Post
quote:
Originally posted by Mark G.:
I have had no issues getting mine clipped to the pocket as it is delivered from the factory. I also tend to use my finger to pull the clip out a bit when I stick it in the pocket. I do this will all my knives and it really helps to save wear on the pocket.

Semi Ditto ...... I havent a problem with any pocket clip , not even the 615.
On Marks thought , when the clip catches the pants ....... I just pull the pants pocket taunt ..


--------------------------------------------------------------------------------------------------
Contempt Prior to Investigation - Dont knock it till you,ve tried it.
Lum Lunatic #8 ..........
"The Society for the Preservation of The AFCK"
Boomerangs 'n Butterflies: An Osborne Alliance #8
 
Posts: 7708 | Location: Gilroy , Ca. | Registered: April 01, 2008Report This Post
  Powered by Social Strata Page 1 2  

Closed Topic Closed

Benchmade.com    The Benchmade Community    Forums  Hop To Forum Categories  Discussion  Hop To Forums  Knives & Rescue Tools    755 Clip Adjustment

© Benchmade Knife Co., Inc. All Rights Reserved.

AKTI logo